The Kordz PLX-HDB.2 uses HDBaseT architecture to support UHD video to 40m, 1080p video to 70m with bi-directional IR and RS-232 control. The transmitter (TX) and receiver (RX) are both powered by a single DC power supply at the transmitter end. Each chassis is only 16mm high with all connections positioned on one side, allowing installation flexibility in tight spaces. Mounting brackets are included. IR and RS-232 cables are available separately.

  • Supports CATx UTP/FTP/STP cable

  • 4K UHD to 40m

  • 1080/60 to 70m

  • Supports HDMI 1.4 UHD60 8-bit 4:2:0

  • Supports HDMI 1.4 UHD30 up to 12-bit 4:2:2, & 8-bit 4:4:4/sRGB

  • HDCP 2.2 compatible

  • HDBaseT certified

  • HDBaseT Lite VS010 architecture

  • IR & RS232 Control



Extension Technology: VS010 HDBaseT Lite
Link Cable Length: <40m UHD24-60fps*, <70m 1080p/60
*UHD 60 fps supported with 8-bit 4:2:0 mode only (HDMI 2.0)
Video Support: VESA and SMPTE 480p to 2160p (4K), 1080p/60 3D
Audio Support: All HDMI audio formats, Dolby HD/Atmos® + DTS® HD-Master Audio/DTS:X + PCM
Channel Count: 2.0 to 7.1 (HDMI 1.4), 10.2-30.2 3D Audio (HDMI 2.0)
Sample Rates: 32kHz, 44.1kHz, 48kHz, 88kHz, 96kHZ, 176.4kHz, 192kHz all channels, 1536kHz 2ch
Thermal Performance: Chassis TX 27°C | RX 35°C free air, room temp 20°C




HDMI: Type A, < 340MHz TMDS Clock
IR Downstream:
IN (on TX): 3.5mm 2-pole [SIG tip | Gnd sleeve]
OUT (on RX): 3.5mm 2-pole, 940nm emitter direct connection
IR Upstream:
IN (on RX): 3.5mm IR target direct [SIG tip | Gnd ring | 12V sleeve]
OUT (on TX): 3.5mm 2-pole, 940nm emitter direct connection
RS-232: Simple transmit/receive protocol
HDBaseT Link: 8P8C (RJ45) shielded, supports up to 10.2Gbps aggregate data rate
DC Power: 24V DC 1.25A (30W), locking connector
Power over HDBaseT (PoH): YES, 25.5W IEEE-802.3at compliant
Chassis Construction: Aluminium, powered coated
Dimension: 103 x 84 x 16mm
Weight: TX 134g | RX 131g
Included accessories: PSU - international adapters, mounting brackets x2 pairs, adhesive rubber feet
Optional accessories: 3.5mm-DB9 RS-232 male cable (PLX-RS232M)
                                      3.5mm-DB9 RS-232 femail cable (PLX-RS232F)
                                      IR target (IR-TB2), IR emitter (IR-EM1)