Technology

10.2 Gbps means that the HDMI cable is capable of the speeds required in the HDMI 1.4 standard, which was released in 2009. In this case, the cable must be capable of sending/receiving 10.2 billion bits per second.

ARC, or Audio Return Channel, is a feature that started in HDMI 1.4 and allows for audio to transmit from a television to a receiver or other device, as opposed to only sending audio from a source such as a Blu-Ray player to a television or receiver. This is a very useful feature for those “cutting the cord” where off air antennas are used or built-in streaming applications such as Netflix, which allows for a better listening experience by bypassing television speakers, which are usually substandard quality.

3D stands for three-dimensional video. 3D was very popular in the early 2010’s and typically relies on glasses, either coloured or active shutter, to give an image three-dimensional depth. 3D often required higher refresh rates to allow for each eye to receive full resolution of the image. There are various formats for 3D, some of which require more data than others.

HEAC stands for HDMI Ethernet/Audio Return Channel. Beyond ARC, HDMI 1.4 also added ethernet support. This enabled two-way internet connections via HDMI if one device has an established ethernet connection. This is particularly useful if a display needs an ethernet connection and a source, which is HEAC compatible, is already connected.

This connector on this cable requires a minimum of 1 kg (2.2 lbs) of force to remove it from the connected device.

  • Product outline

     

    • Solid copper pins and lightweight, folded-gold plated HDMI connectors decrease oxidation and increase 18Gbps signal stability.
    • A highly flexible UL CMG rated jacket fits any installation environment.
    • Benchmark inter-terminal uniformity through Kordz’ patented soldering techniques.
    • Licensed HDMI 2.0 Adopter product, individually tested on assembly line.
    • Kordz’ product performance guarantee and warranty for your lifetime.
  • Application

    480i/p, 576i/p : ≤ 540Mbpsc/1.62Gbps, 270MHz
    720p/60, 1080i/60 : 742.5Mbpsc/2.22Gbps, 371.25MHz

    1080p – 8-bit RGB/YCbCr 4:4:4, 10/12-bit 4:2:2 or 4:2:0
    23.98/24/29.97/30 : 742.5Mbpsc/2.22Gbps, 371.25MHz
    50/59.94/60 : 148.5Mbpsc/4.455Gbps, 742.5MHz
    3D-24/30 : 148.5Gbpsc/4.455Gbps, 742.5MHz
    3D-50/60 : 2.97Gbpsc/8.91Gbps, 1.485GHz

    Lengths to 5m only – High Speed
    1080p – 10/12/16-bit RGB/YCbCr 4:4:4 – 50/59.94/60fps : max. 2.97Gbpsc/8.91Gbps, 1.485GHz

    2160p (UHD/4K)
    HDMI 1.4b – 8-bit RGB/YCbCr 4:4:4, 10/12-bit 4:2:2 or 4:2:0
    4096x2160p/24 (SMPTE) : 2.97Gbpsc/8.91Gbps, 1.485GHz
    3840x2160p/23.98/24/29.97/30 : 2.97Gbpsc/8.91Gbps, 1.485GHz
    HDMI 2.0 – 8-bit YCbCr 4:2:0 – 2160p*/50/59.94/60 ; 2.97Gbpsc/8.91Gbps, 1.485GHz

    VESA Graphics : Supports all as defined by HDMI 2.0 specification, up to 8.91Gbps
    Color Spaces : RGB, YCbCr, xvYCC, Adobe sRGB, sYCC601, ITU-BT.2020
    Audio Formats Support : PCM 2.0-7.1, DD/DTS HD 7.1, 3D Audio
    3D Audio (10.2 / 22.2 / 30.2ch) : Supported – device & video format dependant
    HDMI Ethernet Channel : Supported – system dependant
    HDMI Audio Return Channel : Supported – system dependant
    * HDMI 2.0 2160p modes encapsulate both 4,096 or 3,840 Hres variants & 4:3 anamorphic pixel ratio support

  • Technical info

    HDMI CERTIFICATION – 0.5m – 5.0m Lengths

    HDMI CTS (Certified Test Specification): High Speed with Ethernet
    Certified Data Rate: 6.0Gbpsc, 17.82Gbps agg
    Supported Data Rate: ≥ 6.0Gbpsc, 17.82Gbps agg (4K UHD)
    HDMI Clock: 27-340MHz

    MECHANICAL

    Cable Diameter: 30AWG 5.7mm/0.22ӯ | 28AWG 6.5mm/0.26ӯ
    Mounting Length: cable gauge dependent (see below)
    Cable Bend Radius: cable gauge dependent (see below)
    Retention Force (nominal): 9.9N (1kg / 2.2lbs) +10/-5%

    CONSTRUCTION

    Primary Conductors: Solid 30-28AWG OFC, length dependent
    Insulation on TMDS: HDPE, Foamed-PE, length dependent
    Insulation on 4C + HEAC Pairs: HDPE
    Shielding on TMDS Pairs: Al / Mylar, 125% coverage
    Shielding Overall: AL/Mylar, 100% coverage + Al-Mg alloy braid, min 85% coverage
    Cable Jacket: UL CMG fire-rated PVC composite materials
    HDMI Connector Shell: Premium gauge folded steel, 1μ” 24K Gold plated
    HDMI Connector Pins: Solid OFC, 15μ” 24K Gold plated
    Termination: High Frequency Soldering
    Connector Assembly: ABS connector shell with PVC injection moulded boot and strain relief

  • Warranty

    Kordz PRO Series HDMI comes with our product Lifetime Warranty that promises maintained product function and performance for your lifetime.

PRO Series Passive HDMI Cable

Kordz PRO Series Passive HDMI cables make professional installations easier with solid copper pins, 1kg retention connectors and a highly flexible fire rated jacket. The PRO Series HDMI is robust, flexible and delivers reliable 4K resolution and Ethernet to displays and engineered to the strict Kordz professional installation standard. Each cable is UL CMG fire rated in all lengths, supported by the Kordz Lifetime Warranty and certified by HDMI Licencing.

Colour options:

  • Product Code
  • Description
  • PRO-HD0750

    7.5m / 24.6ft

  • PRO-HD1000

    10m / 32.8ft

  • PRO-HD1250

    12.5m / 41ft

  • PRO-HD1500

    15m / 49.2ft

  • PRO-HD2000

    20m / 65.6ft

Support and Resources

Industry news, insight and innovation.
Subscribe for more from Kordz.

First Name(Required)
This field is for validation purposes and should be left unchanged.