Find A Distributor

Find A Distributor
Partners
Subscribe
Subscribe

Bulk Cables – Indoor

Standard Network System

Bulk Cables – Indoor

Kordz bulk indoor cables include Cat6 and Cat6A variants, designed for high-performance structured cabling. Robust and easy to install, these cables ensure reliable connectivity for professional AV and IT installations.

Filter

    ONE Cat6A F/UTP Network Cable

    ONE Cat6A F/UTP Network Cable

    Kordz professional grade ONE Cat6A F/UTP Network Cable is designed and engineered for systems integrators that require robust, reliable and easy to install Cat6A structured network cable systems.

    It supports 10Gbps to 100 metres and HDBaseT recommended, making it suitable for AV over IP endpoints, SDVoE devices, wireless access points and high-power PoE equipment. Compliance with IEEE 802.3bt allows delivery of up to 100W to displays, cameras and control hardware from a single cable.

    A 23AWG solid oxygen-free copper conductor and internal cross separator maintain pair geometry during pulling, helping links test within Cat6A limits after installation. The foil shield reduces external interference while remaining straightforward to terminate in standard racks and outlets.

    The metre-marked Reel-in-Box packaging simplifies cable management on site, while LSZH and CM fire-rated jackets support residential and commercial compliance requirements. Multiple jacket colours assist service identification during commissioning and maintenance.

    Complete by pairing it with PRS Field Termination RJ45 Plug and PRS Cat6A Keystone RJ45 Sockets.

     

    ONE Cat6 U/UTP Network Cable

    ONE Cat6 U/UTP Network Cable

    Kordz professional grade ONE Cat6 U/UTP Network Cable is designed and engineered for systems integrators that require robust, reliable and easy to install structured network cable systems.

    The cable delivers ANSI/TIA-568.2-D Category 6 performance beyond 550 MHz, supporting 1Gbps up to 100 metres and 10 Gbps up to 55 metres. Solid 24AWG oxygen-free copper conductors and a non-metallic cross separator maintain pair geometry, helping links pass certification across switches, patch panels and outlets.

    Its 5.7 mm diameter routes cleanly through conduit and crowded pathways while remaining suitable for both IDC and crimp terminations. The construction also supports PoE++ powering up to 100 W for modern access points, displays and AV endpoints.

    HDBaseT recommended, the cable is metre-marked for predictable pulls and available in multiple jacket colours and CPR Dca LSZH or UL CM fire ratings.

    Match it with ONE Push Through Connector or PRO 24AWG RJ45 Crimp Connector and PRO Keystone RJ45 Socket.

  • No products matching those filter options within this category